| 1. | Basic data on the field of the habilitation proceeding and the inauguration proceeding (hereinafter referred to as the "HPaIP field") | ||
| Name of the University | University of Žilina | ||
| Name of the Faculty/Workplace | Faculty of Mechanical Engineering | ||
| Name of the HPaIP field | Mechanical Engineering Technologies and Materials | ||
| Awarded title | Associate professor, professor | ||
| University Authority for Approval of the HPaIP field | Accreditation Board | ||
| Number of the decision on granting the right to carry out HPaIP (from the old accreditation) | https://www.portalvs.sk/en/hai/zobrazit/1959 | ||
| Reference to the result of the last periodic review of the HPaIP field by the University | 2019/17108:35-A1110 HaI_priznanie_bez ČO_po vyhodnotení správy_po 1.11.2018/ | ||
| 2. | Definition of the HPaIP field |
| a | Name and definition of the content of the HPaIP field (draw the content definition from the description of the field of study to which the HPaIP field is assigned – state the main topics of the core knowledge of the field of study from the Decree No. 244/2019 Coll. of the Ministry of Education, Science, Research and Sports of the Slovak Republic on the system of fields of study in the Slovak Republic) |
The HP and IP of the specialisation Mechanical Engineering Technologies and Materials is involved in the Study Subject 36 - Mechanical Engineering. The study specialisation MECHANICAL ENGINEERING includes a broad spectrum of knowledge in the area of the theory of mechanics and machine design of various determination, mechanical engineering and manufacturing technologies and quality management, automation technique, information technologies in technique as well the process and industrial engineering, material engineering of the energy, environmental, security technique and other areas of the machinery production. The following subjects are the core of knowledge of this study specialization: applied mechanics, parts and mechanism of machines, mechanical engineering and production technologies, materials ultimate states of materials as a theoretical basis for designing machines, industrial engineering and production quality. The acquired knowledge can be implemented e.g. in all types of the manufacturing, transportation and power-producing machines and equipment, e.g. the motor vehicles, rail vehicles, ships or airplanes, also the manufacturing, agricultural and forestry technique, then also the mechanical engineering technology, material and ultimate states of materials, micro- and nano-technologies, design of machine tools and instruments, environmental technique, automatic and robotic lines and equipment, process technique, manufacturing technologies, industrial engineering, measurement operations, metrology, security of technical systems, quality assurance of the processes, products and services, etc. |
|
| b | Name of the field of study (1 or 2) to which the HPaIP field is assigned (description of the field of study (1 or 2) from the Decree No. 244/2019 Coll. of the Ministry of Education, Science, Research and Sports of the Slovak Republic on the system of fields of study in the Slovak Republic) |
Study Subject 36 - Mechanical Engineering |
|
| c | The content definition of the HPaIP field must be as close as possible to the field of study (1 or 2) to which it is assigned (indicate here the area and scope of knowledge for the third level (point 4) from the Decree No. 244/2019 Coll. of the Ministry of Education, Science, Research and Sports of the Slovak Republic on the system of fields of study in the Slovak Republic) |
The applicant for the title Associate Professor / Professor in HP and IP Mechanical Engineering Technologies and Materials should possess broad professional knowledge of several areas of the MECHANICAL ENGINEERING that serve him/her as a basis for realizing research and development and creating new knowledge in the area of mechanical engineering technologies and materials.
|
| 3. | Level of education in the HPaIP field |
| a | The fact confirming that UNIZA is entitled to design, deliver and modify third-level study programmes in the field of study to which the HPaIP field is assigned.
(If it is assigned to 2 fields of study, the University must have the above-mentioned rights in both fields of study). (https://www.portalvs.sk/sk/) for relevant field(s) of study in a form of a link |
|
|
| b | The fact confirming that UNIZA delivers a third-level study programme, a second-level study programme or a study program combining the first degree and the second degree in the field of study or fields of study to which the HPaIP field is assigned Provide a list of delivered relevant study programmes for the given field of study from the University Portal (Portal VS) |
Engineering Materials (full-time form of study) - 3rd degree https://www.portalvs.sk/en/morho/zobrazit/103591 https://www.portalvs.sk/en/studijny-program/materialyd Engineering Materials (external form of study) - 3rd degree https://www.portalvs.sk/en/morho/zobrazit/103590 https://www.portalvs.sk/en/studijny-program/materialy Engineering Materials (full-time form of study) - 2nd level https://www.portalvs.sk/en/morho/zobrazit/103607 Engineering technologies (full-time form of study) - 3rd degree https://www.portalvs.sk/en/morho/zobrazit/103593 https://www.portalvs.sk/en/studijny-program/strojarske-technologie-a-materialy0d Engineering technologies (external form of study) - 3rd degree https://www.portalvs.sk/en/morho/zobrazit/103592 https://www.portalvs.sk/en/studijny-program/strojarske-technologie-a-materialy0 Engineering technologies (full-time form of study) - 2nd level https://www.portalvs.sk/en/morho/zobrazit/21402
|
| 4. | Persons responsible for the field of habilitation proceedings and inauguration proceedings | ||
| a | HPaIP guarantors who are responsible for the development and quality assurance of the HPaIP field | ||
| 1. Name, surname, titles (the main guarantor appointed by the Dean / Rector): Name, surname, titles (the main guarantor appointed by the Dean / Rector): prof. Ing. Eva Tillová, PhD. Position (assoc.prof./prof.) In the field of operation: prof. / Limit States of Materials contact (mail, tel.): eva.tillova@fstroj.uniza.sk tel.: 00421 41 513 6007 link to portal (register of employees): https://www.portalvs.sk/regzam/detail/9724 |
|||
| Name and surname of other guarantors of the HPaIP field |
Position (Assoc. prof. / prof.) in the field of activity |
Additional information | |
| 2. prof. Ing. Radomila Konečná, PhD. |
prof. / Limit States of Materials |
contact (mail, tel.): radomila.konecna@fstroj.uniza.sk +421 41 513 2604 link to portal (register of employees): https://www.portalvs.sk/regzam/detail/9675 |
|
| 3. prof. Ing. František Nový, PhD. |
prof. / Mechanical Engineering Technology and Materials |
contact (mail, tel.): frantisek.novy@fstroj.uniza.sk +421 41 513 2607 link to portal (register of employees): |
|
| 4. prof. Ing. Dana Bolibruchová, PhD. |
prof. / Mechanical Engineering Technology and Materials |
contact (mail, tel.): danka.bolibruchova@fstroj.uniza.sk +421 41 513 2772 link to portal (register of employees): |
|
| 5. Associate prof. Ing. Miloš Mičian, PhD. |
Associate prof. / Mechanical Engineering Technology and Materials |
contact (mail, tel.): milos.mician@fstroj.uniza.sk +421 41 513 2768 link to portal (register of employees): https://www.portalvs.sk/regzam/detail/9752 |
|
| b | Composition of the Scientific Council of the Faculty with indication of the field of activity according to the valid legislation (If the habilitation proceedings and inauguration proceedings take place at a Faculty, the Scientific Council of the relevant Faculty shall consist of significant experts, at least one of whom has the professional capacity to evaluate the habilitation proceedings and inauguration proceedings in the relevant HPaIP field or in the field of study (fields of study) to which it is assigned and their division into domestic and external members in the prescribed ratio of at least one quarter and at most one third of the external members and with indication of their field of activity.) |
||
The Scientific Board of the Faculty Mechanical Engineering, consists of significant experts, including at least one expert with the professional capacity to assess HPaIP in the relevant field of habilitation and inauguration proceedings and in the field of study (s) to which this assigned. Their division is into domestic and external members in the prescribed ratio of at least one quarter and at most one third of the external members and indicating their field of activity. https://www.fstroj.uniza.sk/index.php/en/faculty/about-faculty/management-of-the-faculty
|
|||
| Composition of the UNIZA Scientific Council with indication of the field of activity according to the valid legislation (The UNIZA Scientific Council shall consist of significant experts, at least one of whom has the professional capacity to evaluate the habilitation proceedings and inauguration proceedings in the relevant HPaIP field or in the field of study (fields of study) to which it is assigned and their division into domestic and external members in the prescribed ratio of at least one quarter and at most one third of the external members and with indication of their field of activity.) |
|||
https://www.uniza.sk/index.php/en/vedecka-rada-en
|
|||
| 5. | Level of research, artistic and other activities in the HPaIP field and level of quality culture of UNIZA | ||
| a | List of the most significant 25 outputs of a group of 5 persons
documenting the implementation of long-term and continuous research, artistic and other activities in the HPaIP field, the intensity and extend of which correspond to the nature of these proceedings and whose results are on an internationally significant level. (for each person there must be at least 2 outputs from the period of the last 6 years prior to the year in which the relevant accreditation application was submitted, ensuring the availability of records of the submitted outputs in databases and registers and compliance with other provisions of the standards). The output is presented in the form of a bibliographic record and must correspond to the outputs that are listed in the Research/Art/Teacher Profile (in Slovak VUPCH) and Research/Artistic/Other Output (in Slovak VTC). |
||
| 1. prof. Ing. Eva Tillová, PhD. https://orcid.org/0000-0002-1010-0713
ID WoS: AAD-7985-2019
ID SCOPUS: 24315221400 https://www.scopus.com/authid/detail.uri?authorId=24315221400 |
1.output ID: 143754 | WoS JCR Q1 ADC: Závodská, Denisa [Autor, 10%]; Kuchariková, Lenka [Autor, 30% ; Tillová, Eva [Autor, 30% ; Guagliano, Mario [Autor, 5% ; Chalupová, Mária [Autor, 10% ; Uhríčik, Milan [Autor, 5% ; Belan, Juraj [Autor, 10%]. The effect of iron content on fatigue lifetime of AlZn10Si8Mg cast alloy. In: International Journal of Fatigue. materials, structures, components. Amsterdam (Holandsko) : Elsevier. ISSN 0142-1123. ISSN (online) 1879-3452. č. 128 (2019), s. [1-8] WOS CC; SCOPUS; CCC. https://doi.org/10.1016/j.prostr.2018.12.317 (WoS - 1 citácia, SCOPUS - 4 citácie) 2.output ID: 180294 | WoS JCR Q1 ADC: Kuchariková, Lenka [Autor, 40%]; Mazur, Magdalena [Autor, 5%]; Tillová, Eva [Autor, 25%]; Chalupová, Mária [Autor, 24%]; Závodská, Denisa [Autor, 1%]; Vaško, Alan [Autor, 5%]. Fracture surfaces of the secondary A226 cast alloy with 0,9% Fe. In: Engineering Failure Analysis. Amsterdam. Elsevier. ISSN 1350-6307. č. 105 (2019), s. 688-698, WOS CC; SCOPUS; CCC, https://doi.org/10.1016/j.engfailanal.2019.07.034 (WoS - 1 citácia, SCOPUS - 1 citácia) 3.output ID: 81705 | WoS JCR Q1 ADC: Kuchariková, Lenka [Autor, 35%]; Liptáková, Tatiana [Autor, 30%]; Tillová, Eva [Autor, 20%]; Kajánek, Daniel [Autor, 10%]; Schmidová, Eva [Autor, 5%]. Role of chemical composition in corrosion of aluminum alloys. In: Metals. Bazilej. Multidisciplinary Digital Publishing Institute. ISSN. 2075-4701. Roč. 8, č. 8 (2018), s. [1-13] cc, WOS, SCOPUS https://doi.org/10.3390/met8080581 (WoS - 17 citácií; SCOPUS - 21 citácií) 4.output PC044355 | WoS JCR Q2 ADM: Trojanová Zuzanka (16%); Donič Tibor (14%); Lukáč Pavol (14%); Palček Peter (14%); Chalupová Mária (14%); Tillová Eva (14%); Bašťovanský Ronald (14%). Tensile and fracture properties of an Mg-RE-Zn alloy at elevated temperatures. In: Journal of Rare Earths. ISSN 1002-0721. Vol. 32, no. 6 (2014), s. 564-572. https://doi.org/10.1016/S1002-0721(14)60109-5 (WoS - 12 citácií; SCOPUS - 14 citácií) 5.output ID: 324505 | WoS ABC: Tillová, Eva [Autor, 34%]; Chalupová, Mária [Autor, 33%]; Kuchariková, Lenka [Autor, 33%]. Evolution of phases in a recycled Al-Si cast alloy during solution treatment. In: Scanning electron microscopy. ed. Viacheslav Kazmiruk. 1 vyd. Rijeka (Chorvátsko): Intech, 2012. ISBN 978-953-51-0092-8, s. 411-438, WOS https://www.intechopen.com/chapters/30939 (WoS - 11 citácií) | ||
| 2. prof. Ing. Radomila Konečná, PhD. https://orcid.org/0000-0002-4825-6537
ID WoS: AAE-7922-2021
ID SCOPUS: 12805210900 https://www.scopus.com/authid/detail.uri?authorId=12805210900 |
1.output PC023611 | WoS JCR Q2 ADC: Collini L., Nicoletto G., Konečná Radomila: Microstructure and mechanical properties of pearlitic gray cast iron. In: Materials Science and Engineering A. ISSN 0921-5093. Vol. 488, No. 1-2 (2008), p. 529-539. https://doi.org/10.1016/j.msea.2007.11.070 (WOS - 119 citácií, SCOPUS - 147 citácií) 2.output PC028463 | WoS JCR Q1 ADC: Kunz Ludvík; Lukáš Petr; Konečná Radomila (40%). High-cycle fatigue of Ni-base superalloy Inconel 713LC. In: International journal of fatigue. ISSN 0142-1123. Vol. 32, no. 6 (2010), s. 908-913. https://doi.org/10.1016/j.ijfatigue.2009.02.042 (WOS - 57 citácií, SCOPUS - 63 citácií) 3.output PC036048 | WoS JCR Q1 ADC: Nicoletto Gianni (20%); Konečná Radomila (50%); Fintová Stanislava (30%): Characterization of microshrinkage casting defects of Al-Si alloys by X-ray computed tomography and metallography. In: International journal of fatigue. ISSN 0142-1123. Vol. 41, August (2012), s. 39-46. https://doi.org/10.1016/j.ijfatigue.2012.01.006 (WOS - 92 citácií, SCOPUS - 111 citácií) 4.output PC051920 | WoS JCR Q1 ADC: Konečná Radomila (80%); Kunz Ludvík (10%); Nicoletto Gianni (5%); Bača Adrián (5%): Long fatigue crack growth in Inconel 718 produced by selective laser melting. In: International journal of fatigue. ISSN 0142-1123. Vol. 92, special issue, part 2 (2016), s. 499-506. https://doi.org/10.1016/j.ijfatigue.2016.03.012 (WOS - 63 citácií, SCOPUS - 75 citácií) 5.output ID: 88246 | WoS JCR Q1 ADC: Nicoletto Gianni (10%); Konečná Radomila (80%); Frkáň Martin (5%); Riva E. (5%): Surface roughness and directional fatigue behavior of as-built EBM and DMLS Ti6Al4V. In: INTERNATIONAL JOURNAL OF FATIGUE, Vol. 116, p. 140-148, november 2018, ISSN 0142-1123. https://doi.org/10.1016/j.ijfatigue.2018.06.011 (WOS - 34 citácií, SCOPUS - 43 citácií) | ||
| 3. prof. Ing. František Nový, PhD. https://orcid.org/0000-0002-7527-5020 ID WoS: AAD-8931-2019
ID SCOPUS: 56398473700 https://www.scopus.com/authid/detail.uri?authorId=56398473700 |
1.output PC029236 | WoS JCR Q1 ADC: NOVÝ, František [Autor 50%]; JANEČEK, Miloš [Autor 25%]; KRAL, Robert [Autor 25%]: Microstructure changes in a 2618 aluminium alloy during ageing and creep. Journal of Alloys and Compounds, Vol. 487 (1-2), 2009, p. 146-151, ISSN 0925-8388, cc, WoS, SCOPUS https://doi.org/10.1016/j.jallcom.2009.08.014 (WoS - 24 citácií, SCOPUS - 51 citácií) 2.output PC042716 | WoS JCR Q1 ADC: TRŠKO, Libor [Autor 40%]; BOKŮVKA, Otakar [Autor 20% ]; GUAGLIANO, Mario [Autor 20%]; NOVÝ, František [Autor 20%]. Effect of Severe Shot Peening on Ultra-high Cycle Fatigue of Low-Alloy Steel. Materials and Design, Vol. 57, 2014, p. 103-113, ISSN 0261-3069, cc, WoS, SCOPUS https://doi.org/10.1016/j.matdes.2013.12.035 (WoS - 66 citácií, SCOPUS - 87 citácií) 3.output ID: 55060 | WoS JCR Q1 ADC: Trško Libor (50%); Fintová Stanislava (5%); Nový František (10%); Bokůvka Otakar (10%); Jambor Michal (10%); Pastorek Filip (5%); Florková Zuzana (5%); Oravcová Monika (5%): Study of Relation Between Shot Peening Parameters and Fatigue Fracture Surface Character of an AW7075 Aluminium Alloy. Metals, Vol. 8, Iss. 2, 111, 2018, ISSN 2075-4701, cc, WoS, SCOPUS https://doi.org/10.3390/met8020111 (WoS - 5 citácií, SCOPUS - 9 citácií) 4.output ID: 145791 | WoS JCR Q1 ADC: Ulewicz Robert (25%); Nový František (25%); Novák Pavol (25%); Palček Peter (25%): The investigation of the fatigue failure of passenger carriage draw-hook. Engineering Failure Analysis, 104, 2019, p. 609-616. ISSN 1350-6307. cc, WoS, SCOPUS https://doi.org/10.1016/j.engfailanal.2019.06.036 (WoS - 6 citácií, SCOPUS - 6 citácií) 5.output ID: 132142 | WoS JCR Q1 ADC: NOVÝ, František [Autor 45%]; JAMBOR, Michal [Autor 5%]; PETRŮ, Michal [Autor 5%]; TRŠKO, Libor [Autor 20%]; FINTOVÁ, Stanislava [Autor 5%]; BOKŮVKA, Otakar [Autor 20%]: Investigation of the brittle fracture of the locomotive draw hook. Engineering Failure Analysis, Vol. 105, 2019, p. 305-312, ISSN 1350-6307. cc, WoS, SCOPUS https://doi.org/10.1016/j.engfailanal.2019.07.019 (WoS - 2 citácie, SCOPUS - 2 citácie) | ||
| 4. prof. Ing. Dana Bolibruchová, PhD. https://orcid.org/0000-0002-7374-9763 ID WoS: ADC-9774-2022
ID SCOPUS: 55521473400 https://www.scopus.com/authid/detail.uri?authorId=55521473400 |
1.output ID: 253187 | WoS JCR Q1 ADC: Kasińska, Justyna [Autor, 10%]; Matejka, Marek [autor, 50%]; Bolibruchová, Dana [Autor, 30%]; Kuriš, Michal [Autor, 5%]; Širanec, Lukáš [Autor, 5%]. Effect of returnable material in batch on hot tearing tendency of AlSi9Cu3 alloy. In: Materials. Bazilej (Švajčiarsko): Multidisciplinary Digital Publishing Institute. ISSN (online) 1996-1944. Roč. 14, č. 7 (2021), s. [1-15] cc, WoS, SCOPUS https://doi.org/10.3390/ma14071583 (WoS - 2 citácie, SCOPUS - citácií) 2.output ID: 222317 | WoS JCR Q1 ADC: Bolibruchová, Dana [Autor, 40%]; Matejka, Marek [Korešpondenčný autor, 50%]; Michalcová, Alena [Autor, 5%]; Kasińska, Justyna [Autor, 5%]. Study of natural and artificial aging on AlSi9Cu3 alloy at different ratios of returnable material in the batch. In: Materials. Bazilej (Švajčiarsko): Multidisciplinary Digital Publishing Institute. ISSN (online) 1996-1944. Roč. 13, č. 20 (2020), art. no. 4538, s. [1-16] [online] cc, WOS, SCOPUS https://doi.org/10.3390/ma13204538 (WoS - 2 citácie, SCOPUS - citácií) 3.output ID: 184247 | WoS JCR Q1 ADC: Kasińska, Justyna [Autor, 5%] ; Bolibruchová, Dana [Autor, 80%] ; Matejka, Marek [Autor, 15%]. The influence of remelting on the properties of AlSi9Cu3 alloy with higher iron content. In: Materials. Bazilej (Švajčiarsko): Multidisciplinary Digital Publishing Institute. ISSN (online) 1996-1944. Roč. 13, č. 3 (2020), s. [1-13] [online] cc, WoS, SCOPUS; https://doi.org/10.3390/ma13030575 (WoS - 2 citácie, SCOPUS - citácií) 4.output ID: 316828 | WoS JCR Q2 ADC: Matejka, Marek [autor, 60%]; Bolibruchová, Dana [Autor, 35%] ; Podprocká, Radka [Autor, 5%].The influence of returnable material on internal homogeneity of the high-pressure die-cast AlSi9Cu3(Fe) alloy. In: Metals. Bazilej (Švajčiarsko): Multidisciplinary Digital Publishing Institute. ISSN (online) 2075-4701. Roč. 11, č. 7 (2021), s. [1-14] [online] cc, WoS, SCOPUS https://doi.org/10.3390/met11071084 (WoS - 2 citácie, SCOPUS - citácií) 5.output PC053538 | WoS JCR Q4 ADC: Bolibruchova, D (autor 80%) Richtarech, L. (autor 10%)) Dobosz, SM (autor 5%) Major-Gabrys, K. (autor 5%). Utilisation of mould temperature change in eliminating the Al5FeSi phases in secondary AlSi7Mg0.3 alloy. In. Archives of metallurgy and materials. ISSN 1733-3490. Vol. 62, iss. 1 (2017), s. 339-344, cc, WoS, SCOPUS DOI: 10.1515/amm-2017-0051 (WoS - 7 citácií, SCOPUS - citácií) | ||
| 5. prof. Ing. Miloš Mičian, PhD. https://orcid.org/0000-0002-4185-6505
ID WoS: AAB-6779-2019
ID SCOPUS: 6508300809 https://www.scopus.com/authid/detail.uri?authorId=6508300809 |
1.output ID: 240835 | WoS JCR Q2 ADC: Mičian, Miloš [Autor, 45%]; Frátrik, Martin [autor, 10%]; Kajánek, Daniel [Autor, 45%]. Influence of welding parameters and filler material on the mechanical properties of HSLA steel S960MC welded joints. In: Metals. Bazilej (Švajčiarsko): Multidisciplinary Digital Publishing Institute. ISSN (online) 2075-4701. Roč. 11, č. 2 (2021), s. [1-19] [online] WOS CC ; SCOPUS ; CCC https://doi.org/10.3390/met11020305 (WoS - 3 citácie, SCOPUS - 3 citácie) 2.output ID: 183299 |WoS JCR Q2 ADC: Mičian Miloš (55%); Harmaniak Daniel (5%); Nový František (15%); Winczek Jerzy (5%); Moravec Jaromír (5%); Trško Libor (15%): Effect of the t8/5 Cooling Time on the Properties of S960MC Steel in the HAZ of Welded Joints Evaluated by Thermal Physical Simulation. In. Metals ISSN 2075-4701 (online). Roč. 10, č. 2 (2020), s. [1-18] [online]. cc, WoS, SCOPUS https://doi.org/10.3390/met10020229 (WoS - 14 citácií, SCOPUS - 15 citácií) 3.output ID: 246546 | WoS JCR Q1 ADC: Mičian, Miloš [autor, 45%]; Winczek, Jerzy [Autor, 10%]; Gucwa, Marek [Autor, 10%]; Koňár, Radoslav [Autor, 25%]; Málek, Miloslav [Autor, 5%]; Postawa, Przemysław [Autor, 5%]. Investigation of welds and heat affected zones in weld surfacing steel plates taking into account the bead sequence. In: Materials. Bazilej (Švajčiarsko): Multidisciplinary Digital Publishing Institute. ISSN (online) 1996-1944. Roč. 13, č. 24 (2020), s. [1-17] [online] cc, WOS, SCOPUS https://doi.org/10.3390/ma13245666 (WoS - 5 citácií, SCOPUS - 4 citácie) 4.output ID: 141800 | WoS JCR Q1 ADC: Lago, Ján [Autor, 10%]; Trško, Libor [Autor, 30%]; Jambor, Michal [Autor, 10%]; Nový, František [Autor, 15%]; Bokůvka, Otakar [Autor, 15%]; Mičian, Miloš [Autor, 10%] Pastorek, Filip [Autor, 10%]. Fatigue life improvement of the high strength steel welded joints by ultrasonic impact peening. In: Metals. Bazilej (Švajčiarsko): Multidisciplinary Digital Publishing Institute. ISSN (online) 2075-4701. Roč. 9, č. 6 (2019), s. [1-15] [online] cc, WOS, SCOPUS; https://doi.org/10.3390/met9060619 (WoS - 12 citácií, SCOPUS - 16 citácií) 5.output PC055838 |WoS JCR Q4 ADC: Sládek Augustin (48%); Patek Marek (4%); Mičian Miloš (48%): Behavior of Steel Branch Connections During Fatigue Loading. In. Archives of metallurgy and materials. ISSN 1733-3490. Vol. 62, iss. 3 (2017), s. 1597-1601, cc, WoS, SCOPUS DOI: 10.1515/amm-2017-0244 (WoS - 5 citácií, SCOPUS - 6 citácií) | ||
| b | UNIZA is entitled to design, deliver and modify the third-level study programmes in at least half of the fields of study in which it provides higher education (Note: this is common for all descriptions of the HPaIP fields – inserted by the R&D Rectorate) | ||
| Name of the field of study | Level of study (1st, 2nd, 3rd) | ||
| Ecological and Environmental Sciences | 1., 2. | ||
| Mechanical Engineering | 1., 2., 3. | ||
| Informatics | 1., 2., 3. | ||
| Cybernetics | 1., 2., 3. | ||
| Electrical Engineering | 1., 2., 3. | ||
| Geodesy and Cartography | 1. | ||
| Civil Engineering | 1., 2., 3. | ||
| Transport | 1., 2., 3. | ||
| Economics and Management | 1., 2., 3. | ||
| Media and Communication Studies | 1., 2., 3. | ||
| Teaching and Pedagogical Sciences | 1., 2. | ||
| Security Sciences | 1., 2., 3. | ||
| Of the 12 fields of study, 9 are third-level fields of study, which represents 75% of the total number of harmonised fields of study. | |||
| c | Periodic review of research, development, artistic and other creative activities: | ||
| Link to the evaluation report of the complex accreditation of UNIZA activities, year 2015: http://www.akredkom.sk/zapis/884fo/prku88612.pdf | |||
| 6. | Criteria for reviewing compliance of conditions for obtaining the title associate professor |
| Link to currently accepted and publicly available criteria for evaluating the compliance with the conditions for obtaining the title of associate professor, which are in accordance with generally binding regulations, and a link to previous versions of the criteria with indication of their validity | |
Criteria for habilitation and inauguration proceedings at the Faculty of mechanical Engineering Criteria valid from 21/04/2022 Criteria valid until 21/04/2022
GENERAL CRITERIA for the appointment of professors and associate professors and SPECIFIC CONDITIONS for the appointment of professors at the Faculty of Mechanical Engineering of the University of Žilina | |
| 7. | Criteria for reviewing compliance of conditions for obtaining the title professor |
| Link to currently accepted and publicly available criteria for evaluating the compliance with the conditions for obtaining the title of professor, which are in accordance with generally binding regulations, and a link to previous versions of the criteria with indication of their validity | |
Criteria for habilitation and inauguration proceedings at the Faculty of mechanical Engineering Criteria valid from 21/04/2022 Criteria valid until 21/04/2022
GENERAL CRITERIA for the appointment of professors and associate professors and SPECIFIC CONDITIONS for the appointment of professors at the Faculty of Mechanical Engineering of the University of Žilina | |
| 8. | Rules and procedures of habilitation proceedings and inauguration proceedings |
| a | Currently established and publicly available rules and procedures of the habilitation proceedings and the inauguration proceedings |
| UNIZA Directive No. 211 Procedure for obtaining scientific-pedagogical and artistic-pedagogical titles associate professor and professor at UNIZA https://www.uniza.sk/images/pdf/kvalita/EN/smernica-UNIZA-c-211-en.pdf | |
| Rules of Procedure of the Faculty Scientific Council and the UNIZA Scientific Council https://uniza.sk/images/pdf/graduacny-rast/2022/rokovaci-poriadok-VR-UNIZA-v-zneni-dodatkov-1-9.pdf | |
| Previously established and publicly available rules and procedures of the habilitation proceedings and the inauguration proceedings with indication of validity | |
| Methodological guideline No. 8/2016 Procedure for obtaining scientific-pedagogical titles or artistic-pedagogical titles associate professor and professor at the University of Žilina in Žilina https://www.uniza.sk/images/pdf/graduacny-rast/2022/postup-ziskavania-doc-prof-metodicke-usmernenie-8-2016.pdf | |
| b | |
List of candidates who have been awarded the academic titles of Associate Professor and Professor since the last comprehensive accreditation in the relevant field of HKaIK: Inaugural proceedings in the field of HPaIP: Mechanical Engineering Technology and Materials prof. Ing. František Nový, PhD. (year of awarding the title: 2022)
prof. Ing. Branislav Hadzima, PhD. (year of awarding the title: 2018)
Habilitation proceedings in the field of HPaIP: Mechanical Engineering Technology and Materials doc. Ing. Lenka Kuchariková, PhD. (year of awarding the title: 2021)
doc. Ing. Mário Drbúl, PhD. (year of awarding the title: 2021)
doc. Ing. Marek Brůna, PhD. (year of awarding the title: 2020)
doc. Ing. Michal Šajgalík, PhD. (year of awarding the title: 2019)
doc. Ing. František Nový, PhD. (year of awarding the title: 2017) https://www.uniza.sk/index.php/habilitacie-a-inauguracie-strojnicka-fakulta/1300-uniza-habilita-108
doc. Ing. Marek T. Roszak, PhD. (year of awarding the title: 2014) https://www.uniza.sk/index.php/habilitacie-a-inauguracie-strojnicka-fakulta/1270-uniza-habilita-78
doc. Ing. Wojciech Zórawski (year of awarding the title: 2014) https://www.uniza.sk/index.php/habilitacie-a-inauguracie-strojnicka-fakulta/1236-uniza-habilita-44 | |
There are currently no habilitation and inauguration proceedings in the field of HKaIK Mechanical Engineering Technology and Materials. |