Description of the Field of Habilitation Proceedings and Inauguration Proceedings

1. Basic data on the field of the habilitation proceeding and the inauguration proceeding (hereinafter referred to as the "HPaIP field")
Name of the University University of Zilina
Name of the Faculty/Workplace Faculty of Mechanical Engineering
Name of the HPaIP field Mechanical Engineering
Awarded title Associate professor (Assoc.-prof.), professor (prof.)
University Authority for Approval of the HPaIP field Accreditation Board UNIZA
Number of the decision on granting the right to carry out HPaIP (from the old accreditation) https://www.portalvs.sk/sk/hai/zobrazit/1401 2015-18768/47303:7-15A0 / Granted without a time limit
Reference to the result of the last periodic review of the HPaIP field by the University
2. Definition of the HPaIP field
a Name and definition of the content of the HPaIP field
(draw the content definition from the description of the field of study to which the HPaIP field is assigned – state the main topics of the core knowledge of the field of study from the Decree No. 244/2019 Coll. of the Ministry of Education, Science, Research and Sports of the Slovak Republic on the system of fields of study in the Slovak Republic)

The HP and IP of the specialisation Mechanical Engineering is involved in the Study Subject 36 - Mechanical Engineering.

The study specialisation MECHANICAL ENGINEERING includes a broad spectrum of knowledge in the area of the theory of mechanics and machine design of various determination, mechanical engineering and manufacturing technologies and quality management, automation technique, information technologies in technique as well security technique and other areas of the machinery production.

The following subjects are the core of knowledge of this study specialisation: applied mechanics, parts and mechanism of machines, mechanical engineering and production technologies and production quality.

The acquired knowledge can be implemented e.g. in all types of the manufacturing, transportation and power-producing machines and equipment, e.g. the motor vehicles, rail vehicles, ships or airplanes, also the manufacturing, agricultural and forestry technique, then also the mechanical engineering technology, material and ultimate states of materials, micro- and nano-technologies, design of machine tools and instruments, environmental technique, automatic and robotic lines and equipment, process technique, manufacturing technologies, industrial engineering,  measurement operations, metrology, security of technical systems, quality assurance of the processes, products and services, etc.
b Name of the field of study (1 or 2) to which the HPaIP field is assigned
(description of the field of study (1 or 2) from the Decree No. 244/2019 Coll. of the Ministry of Education, Science, Research and Sports of the Slovak Republic on the system of fields of study in the Slovak Republic)

36. Mechanical Engineering
c The content definition of the HPaIP field must be as close as possible to the field of study (1 or 2) to which it is assigned
(indicate here the area and scope of knowledge for the third level (point 4) from the Decree No. 244/2019 Coll. of the Ministry of Education, Science, Research and Sports of the Slovak Republic on the system of fields of study in the Slovak Republic)

The applicant for the title Associate Professor / Professor in HP and IP Mechanical Engineering should possess broad professional knowledge of several areas of the MECHANICAL ENGINEERING that serve him/her as a basis for realising research and development and creating new knowledge in the research area of the general mechanical engineering, manufacturing machines and equipment, chip-forming technologies, metrology and automation technique.

The applicant:

  • is able to select the particular scientific methods of the basic and applied research in the area of the general mechanical engineering, manufacturing technique, the chip-forming technologies, metrology and automation technique, etc.;
  • is able to formulate new hypotheses and strategies for further research and development of the field of study MECHANICAL ENGINEERING.
  • is able to implement his/her findings of the theoretical analysis and the complex scientific research for solving the problems of the mechanical engineering area;
  • is able to design, verify and implement new research and working procedures on the basis of his/her outputs;
  • is able to utilise practically the selected research methods and utilises them for developing new methods of chip machining, new tools, new designs of the manufacturing machines with implementation of the measuring, diagnosis and automation technique and systems of the computer support of production including the interactive systems links;
  • is able to realise the research and analytical operations, to solve the tasks connected with modelling the processes and systems, measurement and data processing utilising the systems of the computer support in mechanical engineering;
  • is typical by his/her independent, critical and analytical way of thinking that he/she implements in the changing conditions.
  • independently presents his/her research and development results for the professional community in Slovakia and abroad.
  • takes into account the social, scientific and ethical aspects for forming the research objectives and interpretations of the research results.
  • is able to define the research orientation and to coordinate the team in the given scientific specialisation. 
3. Level of education in the HPaIP field
a The fact confirming that UNIZA is entitled to design, deliver and modify third-level study programmes in the field of study to which the HPaIP field is assigned. (If it is assigned to 2 fields of study, the University must have the above-mentioned rights in both fields of study).
(https://www.portalvs.sk/sk/) for relevant field(s) of study in a form of a link

Automated Production Systems (full-time form of study)
https://www.portalvs.sk/en/morho/zobrazit/12183 

Automated Production Systems (part-time form of study)
https://www.portalvs.sk/en/morho/zobrazit/103602 
b The fact confirming that UNIZA delivers a third-level study programme, a second-level study programme or a study program combining the first degree and the second degree in the field of study or fields of study to which the HPaIP field is assigned
Provide a list of delivered relevant study programmes for the given field of study from the University Portal (Portal VS)

Automated Production Systems (full-time form of study) – 3rd level
https://www.portalvs.sk/en/morho/zobrazit/12183
https://www.portalvs.sk/en/studijny-program/automatizovane-vyrobne-systemy1d

Automated Production Systems (part-time form of study) – 3rd level
https://www.portalvs.sk/en/morho/zobrazit/103602
https://www.portalvs.sk/en/studijny-program/automatizovane-vyrobne-systemy 

Automated Production Systems (full-time form of study) - 2nd level
https://www.portalvs.sk/en/morho/zobrazit/21409 
https://www.portalvs.sk/en/studijny-program/automatizovane-vyrobne-systemy0 

Mechanical Engineering (part-time form of study) - 2nd level
https://www.portalvs.sk/en/morho/zobrazit/103608 
https://www.portalvs.sk/en/studijny-program/strojarstvo 
4. Persons responsible for the field of habilitation proceedings and inauguration proceedings
a HPaIP guarantors who are responsible for the development and quality assurance of the HPaIP field
1. Name, surname, titles (the main guarantor appointed by the Dean / Rector):

Ivan Kuric, prof. Dr. Ing. (the main guarantor appointed by the Dean / Rector):

  • Position (Assoc.-prof. / prof.) In the field of operation: Mechanical Engineering Technologies and Materials (field of study: Mechanical Engineering)
  • contact (e-mail, phone): ivan.kuric@fstroj.uniza.sk; phone 1: +421 41 513 2800, phone 2: +421 41 513 2801
  • link to portal (register of employees): https://www.portalvs.sk/regzam/detail/1970
  • link to VUPCH:
  • link to VTC:
  • link to CV:
  • link to a solemn declaration that they are responsible for the development of only 1 HPaIP department at 1 university in the Slovak Republic:
Name and surname
of other guarantors of the HPaIP field		 Position (Assoc. prof. / prof.)
in the field of activity		 Additional information
2.

Andrej Czán, prof. Ing., PhD.

Mechanical Engineering Technologies and Materials
3.

Vladimír Bulej, Assoc.-prof. Ing., PhD.

Mechanical Engineering
4.

Michal Šajgalík, Assoc.-prof. Ing., PhD.

Mechanical Engineering
5.

Mária Čilliková, Assoc.-prof. Ing., PhD.

Mechanical Engineering
b Composition of the Scientific Council of the Faculty with indication of the field of activity according to the valid legislation
(If the habilitation proceedings and inauguration proceedings take place at a Faculty, the Scientific Council of the relevant Faculty shall consist of significant experts, at least one of whom has the professional capacity to evaluate the habilitation proceedings and inauguration proceedings in the relevant HPaIP field or in the field of study (fields of study) to which it is assigned and their division into domestic and external members in the prescribed ratio of at least one quarter and at most one third of the external members and with indication of their field of activity.)

https://www.fstroj.uniza.sk/index.php/en/vedecka-rada 
Composition of the UNIZA Scientific Council with indication of the field of activity according to the valid legislation
(The UNIZA Scientific Council shall consist of significant experts, at least one of whom has the professional capacity to evaluate the habilitation proceedings and inauguration proceedings in the relevant HPaIP field or in the field of study (fields of study) to which it is assigned and their division into domestic and external members in the prescribed ratio of at least one quarter and at most one third of the external members and with indication of their field of activity.)

https://www.uniza.sk/index.php/en/vedecka-rada-en 
5. Level of research, artistic and other activities in the HPaIP field and level of quality culture of UNIZA
a List of the most significant 25 outputs of a group of 5 persons documenting the implementation of long-term and continuous research, artistic and other activities in the HPaIP field, the intensity and extend of which correspond to the nature of these proceedings and whose results are on an internationally significant level.
(for each person there must be at least 2 outputs from the period of the last 6 years prior to the year in which the relevant accreditation application was submitted, ensuring the availability of records of the submitted outputs in databases and registers and compliance with other provisions of the standards). The output is presented in the form of a bibliographic record and must correspond to the outputs that are listed in the Research/Art/Teacher Profile (in Slovak VUPCH) and Research/Artistic/Other Output (in Slovak VTC).
1.

Ivan KURIC, prof. Dr. Ing.

 1.output ID: 434189 | ADC Kuric, Ivan [Autor, 15%]; Klarák, Jaromír [Korešpondenčný autor, 25%]; Sága, Milan [Korešpondenčný autor, 10%]; Císar, Miroslav [Autor, 25%]; Hajdučík, Adrián [Autor, 15%]; Więcek, Dariusz [Autor, 10%]. Analysis of the possibilities of tire-defect inspection based on unsupervised learning and deep learning. In: Sensors [textový dokument (print)] [elektronický dokument] . – Bazilej (Švajčiarsko) : Multidisciplinary Digital Publishing Institute. – ISSN 1424-3210. – ISSN (online) 1424-8220. – Roč. 21, č. 21 (2021), s. [1-24] [online] – DOI 10.3390/s21217073. WOS CC ; SCOPUS ; CCC (WoS - 0 citations; SCOPUS - 0 citations)
2.output ID: 446186 | ADC Sága, Milan [Autor, 10%]; Perutka, Karel [Autor, 10%]; Kuric, Ivan [Autor, 15%]; Zajačko, Ivan [Korešpondenčný autor, 15%]; Bulej, Vladimír [Autor, 15%]; Tlach, Vladimír [Autor, 25%]; Bezák, Martin [Autor, 10%]. Methods of Pre-identification of TITO systems. In: Applied sciences [elektronický dokument] . – Bazilej (Švajčiarsko) : Multidisciplinary Digital Publishing Institute. – ISSN (online) 2076-3417. – Roč. 11, č. 15 (2021), s. [1-15] [online]– DOI 10.3390/app11156954. – WOS CC ; SCOPUS ; CCC (WoS - 1 citation; SCOPUS - 1 citation)
3.output ID: 309869 | ADC Kuric, Ivan [Autor, 15%]; Klačková, Ivana [Autor, 25%]; Nikitin, Yury Rafailovich [Autor, 5%]; Zajačko, Ivan [Autor, 25%]; Císar, Miroslav [Autor, 25%]; Tucki, Karol [Autor, 5%]. Analysis of diagnostic methods and energy of production systems drives. In: Processes [elektronický dokument] . – Bazilej (Švajčiarsko) : Multidisciplinary Digital Publishing Institute. – ISSN (online) 2227-9717. – Roč. 9, č. 5 (2021), s. [1-19] [online] – DOI 10.3390/pr9050843. – WOS CC ; SCOPUS ; CCC (WoS - 6 citations; SCOPUS - 4 citations)
4.output ID: 308401 | ADC Kuric, Ivan [Autor, 20%]; Tlach, Vladimír [Korešpondenčný autor, 25%]; Sága, Milan [Autor, 5%]; Císar, Miroslav [Autor, 25%]; Zajačko, Ivan [Autor, 25%]. Industrial robot positioning performance measured on inclined and parallel planes by double Ballbar. In: Applied sciences [elektronický dokument] . – Bazilej (Švajčiarsko) : Multidisciplinary Digital Publishing Institute. – ISSN (online) 2076-3417. – Roč. 11, č. 4 (2021), s. [1-17] [online] – DOI 10.3390/app11041777. – WOS CC ; SCOPUS ; CCC (WoS - 3 citations; SCOPUS - 3 citations)
5.output ID: 55921 | ADC Kuric, Ivan [Autor, 20%]; Bulej, Vladimír [Korešpondenčný autor, 50%]; Sága, Milan [Autor, 20%]; Pokorný, Peter [Autor, 10%];. Development of simulation software for mobile robot path planning within multilayer map system based on metric and topological maps. In: International journal of advanced robotic systems [elektronický dokument]. SAGE Publications, Inc. (USA). ISSN (online) 1729-8814. Roč. 14, č. 6 (2017), s. [1-14] [online] - DOI 10.1177/1729881417743029. WOS CC ; SCOPUS ; CCC (WoS - 26 citations; SCOPUS - 36 citations)
2.

Andrej CZÁN, prof. Ing., PhD.

 1.output ID: 118527 | ADC Valíček, Jan [Autor, 10%]; Czán, Andrej [Autor, 10%]; Harničárová, Marta [Autor, 10%]; Šajgalík, Michal [Autor, 10%]; Kušnerová, Milena [Autor, 10%]; Czánová, Tatiana [Autor, 10%]; Kopal, Ivan [Autor, 10%]; Gombár, Miroslav [Autor, 10%]; Kmec, Ján [Autor, 10%]; Šafář, Marek [Autor, 10%]. A new way of identifying, predicting and regulating residual stress after chip-forming machining. In: International Journal of Mechanical Sciences [textový dokument (print)] [elektronický dokument] . – Amsterdam (Holandsko) : Elsevier. – ISSN 0020-7403. – ISSN (online) 1879-2162. – č. 155 (2019), s. 343-359 [tlačená forma] [online] – DOI 10.1016/j.ijmecsci.2019.03.007. – WOS CC ; SCOPUS ; CCC; Verejná poznámka: Evidované v Scopus, WoS, CCC, IF=3,622, Q1 (WoS - 6 citations; SCOPUS - 9 citations)
2.output ID: 186165 | ADC Šajgalík, Michal [Autor, 12%]; Kušnerová, Milena [Autor, 12%]; Harničárová, Marta [Autor, 12%]; Valíček, Jan [Autor, 12%]; Czán, Andrej [Autor, 7%]; Czánová, Tatiana [Autor, 10%]; Drbúl, Mário [Autor, 25%]; Borzan, Marian [Autor, 5%]; Kmec, Ján [Autor, 5%]. Analysis and prediction of the machining force depending on the parameters of trochoidal milling of hardened steel. In: Applied sciences [elektronický dokument] . – Bazilej (Švajčiarsko) : Multidisciplinary Digital Publishing Institute. – ISSN (online) 2076-3417. – Roč. 10, č. 5 (2020), s. [1-19] [online] – DOI 10.3390/app10051788. – WOS CC ; SCOPUS ; CCC (WoS - 6 citations; SCOPUS - 7 citations)
3.output ID: 105669 | ADC Gombár, Miroslav [Autor, 16%]; Vagaská, Alena [Autor, 14%]; Harničárová, Marta [Autor, 14%]; Valíček, Jan [Autor, 14%]; Kušnerová, Milena [Autor, 14%]; Czán, Andrej [Autor, 14%]; Kmec, Ján [Autor, 14%]. Experimental Analysis of the Influence of Factors Acting on the Layer Thickness Formed by Anodic Oxidation of Aluminium. In: Coatings [elektronický dokument] . – Bazilej (Švajčiarsko) : Multidisciplinary Digital Publishing Institute. – ISSN (online) 2079-6412. – Roč. 9, č. 1 (2019), s. 1-21 [online] – DOI 10.3390/coatings9010057. – WOS CC ; SCOPUS ; CCC (WoS - 3 citations; SCOPUS - 5 citations)
4.output ID: 42687 | ADM Czán, Andrej [Autor, 14%]; Šajgalík, Michal [Autor, 12%]; Holubjak, Jozef [Autor, 12%]; Kouril, K. : Studying of cutting zone when finishing titanium alloy by application of multifunction measuring system. In: Manufacturing Technology, Volume 13, Issue 4, December2013, s. 428-431 (WoS - 0 citations; SCOPUS - 14 citations)
5.output ID: 111645 | ADM Molotová, Šárka [Autor, 20%]; Čep, Robert [Autor, 10%]; Zlámal, Tomáš [Autor, 10%]; Mohyla, Petr [Autor, 10%]; Czán, Andrej [Autor, 20%]; Antić, Aco [Autor, 10%]; Budak, Igor [Autor, 10%]; Mircea, Lobonţiu [Autor, 10%]. Evaluation of residual stresses after irregular interrupted machining. In: Tehnički Vjesnik [textový dokument (print)] [elektronický dokument] . – Slavonski Brod (Chorvátsko) : Sveučilište Josipa Jurja Strossmayera u Osijeku. Strojarski fakultet. – ISSN 1330-3651. – ISSN (online) 1848-6339. – Roč. 25, č. 4 (2018), s. 1009-1013 [tlačená forma] [online] – DOI 10.17559/TV-20160615125650. – WOS CC ; SCOPUS (WoS - 5 citations; SCOPUS - 5 citations)
3.

Vladimír BULEJ, Assoc.-prof. Ing., PhD.

 1.output ID: 434189 | ADC Kelemen, Michal [Autor, 28%]; Virgala, Ivan [Autor, 25%]; Lipták, Tomáš [Autor, 1%]; Miková, Ľubica [Autor, 25%]; Filakovský, Filip [Autor, 1%]; Bulej, Vladimír [Autor, 20%]. A novel approach for a inverse kinematics solution of a redundant manipulator. In: Applied sciences [elektronický dokument] . – Bazilej (Švajčiarsko) : Multidisciplinary Digital Publishing Institute. – ISSN (online) 2076-3417. – Roč. 8, č. 11 (2018), s. 1-20 [online] – DOI 10.3390/app8112229. – WOS CC; SCOPUS; CCC (WoS - 20 citations; SCOPUS – 21 citations)
2.output ID: 446215 | ADC Klarák, Jaromír [Korešpondenčný autor, 25%]; Kuric, Ivan [Autor, 20%]; Zajačko, Ivan [Autor, 20%]; Bulej, Vladimír [Autor, 10%]; Tlach, Vladimír [Autor, 20%]; Józwik, Jerzy [Autor, 5%]. Analysis of laser sensors and camera vision in the shoe position inspection system. In: Sensors [textový dokument (print)] [elektronický dokument] . – Bazilej (Švajčiarsko) : Multidisciplinary Digital Publishing Institute. – ISSN 1424-3210. – ISSN (online) 1424-8220. – Roč. 21, č. 22 (2021), s. [1-20] [online] [tlačená forma] – DOI 10.3390/s21227531. – WOS CC ; SCOPUS ; CCC (WoS - 0 citations; SCOPUS - 0 citations)
3.output ID: 323518 | ABC Bulej, Vladimír [Autor, 100%]. 2015. Innovative and non-standard applications of mechanisms with parallel kinematic structure / Bulej, Vladimír [Autor, 100%] ; Legutko, Stanisław [Recenzent] ; Moldovan, Virgil [Recenzent] In: Mechanization and automation equipment for processing. – 1 vyd. – Cluj-Napoca : Publishing House Alma Mater, 2015. – ISBN 978-606-504-188-2, s. 164-208
4.output ID: 35514 | ADE Poppeová, Viera [Korešpondenčný autor, 50%]; Uríček, Juraj [Autor, 20%]; Bulej, Vladimír [Autor, 20%]; Šindler, Peter [Autor, 10%]. Delta robots - Robots for high speed manipulation. Technicki vjestnik - Technical Gazette, ISSN 1330-3651, - Vol. 18, no. 3 (2011), s. 435-445. (WoS - 11 citations; SCOPUS - 18 citations)
5.output ID: 190101 | ADC Sága, Milan [Autor, 25%]; Bulej, Vladimír [Autor, 25%]; Čuboňová, Nadežda [Autor, 10%]; Kuric, Ivan [Autor, 25%]; Virgala, Ivan [Autor, 14%]; Eberth, Manfred [Autor, 1%]. Case study: Performance analysis and development of robotized screwing application with integrated vision sensing system for automotive industry. In: International Journal of Advanced Robotic Systems [textový dokument (print)] [elektronický dokument] . – Viedeň (Rakúsko) : Technische Universität Wien. – ISSN 1729-8806. – ISSN (online) 1729-8814. – Roč. 17, č. 3 (2020), s. 1-23 [tlačená forma] [online] – DOI 10.1177/1729881420923997. – WOS CC ; SCOPUS ; CCC (WoS - 9 citations; SCOPUS - 11 citations)
4.

Michal ŠAJGALÍK, Assoc.-prof. Ing., PhD.

 1.output ID: 200805 | ADC Valíček, Jan [Korešpondenčný autor, 10%]; Harničárová, Marta [Autor, 10%]; Řehoř, Jan [Autor, 10%]; Kušnerová, Milena [Autor, 10%]; Gombár, Miroslav [Autor, 10%]; Drbúl, Mário [Autor, 25%]; Šajgalík, Michal [Autor, 10%]; Filipenský, Jan [Autor, 5%]; Fulemová, Jaroslava [Autor, 5%]; Vagaská, Alena [Autor, 5%]. Prediction of cutting parameters of HVOF-Sprayed Stellite 6. In: Applied sciences [elektronický dokument] . – Bazilej (Švajčiarsko) : Multidisciplinary Digital Publishing Institute. – ISSN (online) 2076-3417. – Roč. 10, č. 7 (2020), s. [1-23] [online] – DOI 10.3390/app10072524. – WOS CC ; SCOPUS ; CCC (WoS - 1 citation; SCOPUS – 1 citation)
2.output ID: 481486 | V3 Sadílek, Marek [Autor, 25%] ; Poruba Zdenek[Autor, 25%] ; Čepová Lenka[Autor, 25%] ; Šajgalík Michal[Autor, 25%]. Increasing the Accuracy of Free-Form Surface Multiaxis Milling. In: Materials [elektronický dokument]. - Bazilej (Švajčiarsko) : Multidisciplinary Digital Publishing Institute. – ISSN (online) 1996-1944. Roč. 14, č. 1 (2021), s. [1-15] [online] . - DOI 10.3390/ma14010025. - WOS CC; SCOPUS; CCC (WoS - 3 citations; SCOPUS - 3 citations)
3.output ID: 188211 | ADC Valíček, Jan [Autor, 16%]; Harničárová, Marta [Autor, 12%]; Kušnerová, Milena [Autor, 12%]; Šajgalík, Michal [Autor, 12%]; Kmec, Ján [Autor, 12%]; Kopal, Ivan [Autor, 12%]; Panda, Anton [Autor, 12%]; Palková, Zuzana [Autor, 12%]. Reverse reconstruction of surface topography from residual stress after chip-forming machining of the material = Rekonstruktion der Oberflächentopographie aus der Eigenspannung nach spanender Bearbeitung des Werkstoffes. In: Materialwissenschaft und Werkstofftechnik [textový dokument (print)] [elektronický dokument] . – Wenheim (Nemecko) : John Wiley & Sons. Wiley-VCH. – ISSN 0933-5137. – ISSN (online) 1521-4052. – Roč. 51, č. 5 (2020), s. 579-585 [tlačená forma] [online] – DOI 10.1002/mawe.202000017. – WOS CC ; SCOPUS ; CCC (WoS - 0 citations; SCOPUS - 1 citation)
4.output ID: 109035 | ADM Čep, Robert [Autor, 15%]; Molotová, Šárka [Autor, 15%]; Kouřil, Karel [Autor, 15%]; Čepová, Lenka [Autor, 15%]; Kyncl, Ladislav [Autor, 15%]; Šajgalík, Michal [Autor, 15%]; Czánová, Tatiana [Autor, 10%]. Evaluation of residual stress in conditions of irregular interrupted cut. In: MM Science Journal [textový dokument (print)] [elektronický dokument] . – Praha (Česko) : MM Publishing. – ISSN 1803-1269. – ISSN (online) 1805-0476. – č. Oktober (2018), s. 2436-2440 [tlačená forma] [online] – SCOPUS (WoS - 0 citations; SCOPUS - 0 citations)
5.output ID: 43469 | ADM Stančeková Dana (30%) - Kurňava Tomáš (10%) - Šajgalík Michal (30%) - Náprstková Nataša (10%) - Struharňanský Jozef (10%) - Ščotka Peter (10%). Identification of machinability of ceramic materials by turning. In: Manufacturing technology : journal for science, research and production. - ISSN 1213-2489. - Vol. 14, no. 1 (2014), pp. 91-97. - SCOPUS (WoS - 0 citations; SCOPUS - 7 citations)
5.

Mária ČILLIKOVÁ, Assoc.-prof. Ing., PhD.

 1.output ID: 255752 | ADC Čilliková, Mária [Korešpondenčný autor, 25%]; Mičietová, Anna [Autor, 25%]; Čep, Robert [Autor, 10%]; Mičieta, Branislav [Autor, 25%]; Neslušan, Miroslav [Autor, 10%]; Kejzlar, Pavel [Autor, 5%]. Asymmetrical Barkhausen noise of a hard milled surface. In: Materials [elektronický dokument] . – Bazilej (Švajčiarsko) : Multidisciplinary Digital Publishing Institute. – ISSN (online) 1996-1944. – Roč. 14, č. 5 (2021), s. [1-12] [online] – DOI 10.3390/ma14051293. – WOS CC ; SCOPUS ; CCC (WoS - 1 citation; SCOPUS - 3 citations)
2.output ID: 137558 | ADC Neslušan, Miroslav [Autor, 40%]; Minárik, P. [Autor, 20%]; Čilliková, Mária [Autor, 20%]; Kolařík, Kamil [Autor, 10%]; Rubešová, K. [Autor, 10%]. Barkhausen noise emission in tool steel X210Cr12 after semi-solid processing. In: Materials Characterization [textový dokument (print)] : an international journal on materials structure and behavior. – New York (USA) : Elsevier. – ISSN 1044-5803. – ISSN (online) 1873-4189. – č. 157 (2019), s. 1-12 [tlačená forma] / – [recenzované]. – DOI 10.1016/j.matchar.2019.109891. – WOS CC ; SCOPUS ; CCC (WoS - 8 citations; SCOPUS - 10 citations)
3.output ID: 176464 | ADC Neslušan, Miroslav [Autor, 30%]; Uríček, Juraj [Autor, 25%]; Mičietová, Anna [Autor, 15%]; Minárik, P. [Autor, 10%]; Píška, M. [Autor, 10%]; Čilliková, Mária [Autor, 10%]. Decomposition of cutting forces with respect to chip segmentation and white layer thickness when hard turning 100Cr6. In: Journal of Manufacturing Processes [textový dokument (print)] [elektronický dokument] . – Oxford (Veľká Británia) : Elsevier. Elsevier Science. – ISSN 1526-6125. – ISSN (online) 2212-4616. – č. 50 (2020), s. 475-484 [tlačená forma] [online] – DOI 10.1016/j.jmapro.2020.01.004. – WOS CC ; SCOPUS ; CCC (WoS - 5 citations; SCOPUS - 6 citations)
4.output ID: 203151 | ADC Čilliková, Mária [Autor, 25%]; Uríček, Juraj [Autor, 25%]; Neslušan, Miroslav [Korešpondenčný autor, 15%]; Ballo, Vladimír [Autor, 10%]; Mičietová, Anna [Autor, 25%]. Monitoring of thermal damage after deposition of coatings via Barkhausen noise technique. In: Acta Physica Polonica A [textový dokument (print)] [elektronický dokument] . – Varšava (Poľsko) : Polska Akademia Nauk. Instytut Fizyki. – ISSN 0587-4246. – ISSN (online) 1898-794X. – Roč. 137, č. 5 (2020), s. 637-639 [tlačená forma] [online] – [recenzované]. – DOI 10.12693/APhysPolA.137.637. – WOS CC ; SCOPUS ; CCC (WoS - 1 citation; SCOPUS - 1 citation)
5.output ID: 92506 | ADM Neslušan, Miroslav [Autor, 25%]; Čilliková, Mária [Autor, 25%]; Kejzlar, Pavel [Autor, 25%]; Uríček, Juraj [Autor, 25%]. Non destructive evaluation of surfaces after hard milling. In: MM Science Journal [textový dokument (print)] [elektronický dokument] . – Praha (Česko) : MM Publishing. – ISSN 1803-1269. – ISSN (online) 1805-0476. – č. November (2018), s. 2507-2511 [tlačená forma] [online] – DOI 10.17973/MMSJ.2018_11_201815. – SCOPUS (WoS - 0 citations; SCOPUS - 0 citations)
b UNIZA is entitled to design, deliver and modify the third-level study programmes in at least half of the fields of study in which it provides higher education
(Note: this is common for all descriptions of the HPaIP fields – inserted by the R&D Rectorate)
Name of the field of study Level of study
(1st, 2nd, 3rd)
Ecological and Environmental Sciences 1., 2.
Mechanical Engineering 1., 2., 3.
Informatics 1., 2., 3.
Cybernetics 1., 2., 3.
Electrical Engineering 1., 2., 3.
Geodesy and Cartography 1.
Civil Engineering 1., 2., 3.
Transport 1., 2., 3.
Economics and Management 1., 2., 3.
Media and Communication Studies 1., 2., 3.
Teaching and Pedagogical Sciences 1., 2.
Security Sciences 1., 2., 3.
Of the 12 fields of study, 9 are third-level fields of study, which represents 75% of the total number of harmonised fields of study.
c Periodic review of research, development, artistic and other creative activities:
Link to the evaluation report of the complex accreditation of UNIZA activities, year 2015:
http://www.akredkom.sk/zapis/884fo/prku88612.pdf
6. Criteria for reviewing compliance of conditions for obtaining the title associate professor
Link to currently accepted and publicly available criteria for evaluating the compliance with the conditions for obtaining the title of associate professor, which are in accordance with generally binding regulations, and a link to previous versions of the criteria with indication of their validity

Link to documents needed for graduate staff growth: https://www.fstroj.uniza.sk/index.php/zamestnanci/rast-zamestnancov/graduacny-rast

Link to documents needed for graduate staff growth: https://www.uniza.sk/index.php/en/scientists-and-partners/events/habilitation-and-inaugural-proceedings 

  1. Link to current criteria on the faculty website / UNIZA website: https://www.fstroj.uniza.sk/images/fstroj/habinau/Kriteria_SjF_na_Hab_a_Prof_platne_od-_21_4_2022.pdf
  2. Link to previous versions of criteria indicating their validity: https://www.fstroj.uniza.sk/images/fstroj/habinau/Kriteria_na_Hab_a_Prof_platne_od-_19_11_2020-do-21_4_2022.pdf
7. Criteria for reviewing compliance of conditions for obtaining the title professor
Link to currently accepted and publicly available criteria for evaluating the compliance with the conditions for obtaining the title of professor, which are in accordance with generally binding regulations, and a link to previous versions of the criteria with indication of their validity

Link to documents needed for graduate staff growth (available in Slovak language): https://www.fstroj.uniza.sk/index.php/zamestnanci/rast-zamestnancov/graduacny-rast

Link to documents needed for graduate staff growth (available in English language): https://www.uniza.sk/index.php/en/scientists-and-partners/events/habilitation-and-inaugural-proceedings 

  1. Link to current criteria on the faculty website / UNIZA website: https://www.fstroj.uniza.sk/images/fstroj/habinau/Kriteria_SjF_na_Hab_a_Prof_platne_od-_21_4_2022.pdf
  2. Link to previous versions of criteria indicating their validity: https://www.fstroj.uniza.sk/images/fstroj/habinau/Kriteria_na_Hab_a_Prof_platne_od-_19_11_2020-do-21_4_2022.pdf
8. Rules and procedures of habilitation proceedings and inauguration proceedings
a Currently established and publicly available rules and procedures of the habilitation proceedings and the inauguration proceedings
UNIZA Directive No. 211 Procedure for obtaining scientific-pedagogical and artistic-pedagogical titles associate professor and professor at UNIZA
https://www.uniza.sk/images/pdf/kvalita/EN/smernica-UNIZA-c-211-en.pdf
Rules of Procedure of the Faculty Scientific Council and the UNIZA Scientific Council
https://uniza.sk/images/pdf/graduacny-rast/2022/rokovaci-poriadok-VR-UNIZA-v-zneni-dodatkov-1-9.pdf
Previously established and publicly available rules and procedures of the habilitation proceedings and the inauguration proceedings with indication of validity
Methodological guideline No. 8/2016 Procedure for obtaining scientific-pedagogical titles or artistic-pedagogical titles associate professor and professor at the University of Žilina in Žilina
https://www.uniza.sk/images/pdf/graduacny-rast/2022/postup-ziskavania-doc-prof-metodicke-usmernenie-8-2016.pdf
b

Link to completed habilitation and inauguration proceedings in the relevant HPaIP field and their results:

https://www.fstroj.uniza.sk/index.php/zamestnanci/rast-zamestnancov/graduacny-rast

Inaugural proceedings in the field of HPaIP – Mechanical Engineering:

  • prof. Ing. Alžbeta Sapietová, PhD. (year of awarding the title: 2021) https://www.uniza.sk/index.php/habilitacie-a-inauguracie-strojnicka-fakulta/2629-inauguracne-konanie-doc-ing-alzbeta-sapietova-phd

Habilitation proceedings in the field of HPaIP – Mechanical Engineering:

Link to existing habilitation and inauguration proceedings in the relevant HPaIP:

Inaugural proceedings in the field of HPaIP – Mechanical Engineering:

  • At present, there are no inauguration proceedings in the field of HPaIP Mechanical Engineering.

Habilitation proceedings in the field of HPaIP – Mechanical Engineering: